Konica Minolta bizhub PRESS C1060 - Manual (Page 21)

bizhub PRESS C1070/C1070P/C1060, bizhub PRO C1060L 2-13
2.2 Administrator Security Functions 2
2.2.3 Deleting Temporary Data
Use this function to select whether or not to erase the temporary data on HDD or DRAM in order to prevent
them from being reused. When erasing the data, also select one of the two erase modes provided on the
screen.
1
Press Utility/Counter on the control panel to display the Utility Menu Screen.
2
Press [03 Administrator Setting].
% For bizhub PRESS C1070P, press [02 Administrator Setting].
The Administrator Password Screen is displayed.
3
Enter the administrator password.
% Use the touch panel keypad to enter the administrator password consisting of 8 alphanumeric char-
acters and symbols, then press [OK].
% The alphabetic characters are case-sensitive.
% If a wrong password or fewer than 8 alphanumeric characters/symbols are entered and [OK] is
pressed, the warning message [Password is incorrect / Please wait for a while] is displayed, and no
key will work for five seconds. Enter the correct password after five seconds.
% The information about failed authentication is saved in the audit log.