Konica Minolta bizhub 181 - Manual (Page 141)

6 Utility mode
6-2 bizhub 181
Utility mode
Chap
te
r 6
6 Utility mode
6.1 Settings that can be specified from this machine
From the Utility mode, default settings for each function can be specified ac-
cording to the operating conditions and environment. To change the set-
tings, press the [Utility] key in the control panel.
There are 13 menus containing parameters that can be changed.
2
Note
For details on items 1 through 7, refer to chapter 6, “Utility mode/Copy
mode parameters”, of the User’s Guide for the copier.
For details on items 8 through 12, refer to chapter 5, “Utility mode/Fax
mode parameters”, of the User’s Guide for the fax kit.
No. Menu name Description
1 MACHINE SETTING Used to specify settings for the machine’s operating environ-
ment.
2 PAPER SOURCE SET-
UP Used to specify the size and type of paper loaded in the 1st pa-
per drawer. In addition, settings can be specified for the paper
drawers that are selected during the automatic tray switching
operation.
3 CUSTOM SIZE MEMO-
RY Used to register up to two custom paper sizes.
4 USER MANAGEMENT Used to perform maintenance operations in order to maintain
the machine’s efficiency.
5 ADMIN. MANAGE-
MENT Used by the administrator to specify settings for managing the
accounts and to specify remote monitoring settings.
6 COPY SETTING 1 Used to specify the default settings for the various copy func-
tions.
7 COPY SETTING 2