Konica Minolta bizhub 181 - Manual (Page 11)

x-10 bizhub 181
12 [Density] key Press to select the scanning density of copies.
13 [Quality] key Press to select “TEXT”, “PHOTO” or “TEXT/PHOTO” as the doc-
ument quality.
14 [Zoom] key Press to specify whether to enlarge or reduce the image when
copying.
15 [Paper] key Press to select the paper drawer that is to be used.
16 [Function] key/indi-
cator Press to specify settings for advanced copy operations, such as
copying with a binding margin added.
17 [Finishing] key/indi-
cator Press to select a copy Finishing function.
18 [Combine Original]
key/indicator Specify settings to copy multiple (2 or 4) document pages togeth-
er within a single sheet of paper (2in1 or 4in1).
19 [Confirm] key Press to view the counters or transmission results, or to print a
transmission result report.
20 [Utility] key Press to specify settings in Utility mode. (p. 6-2)
21 [Mode Memory] key Press to register specified copy programs and recall them.
No. Part name Description
22
27
29
23 24 25 26
28
30
No. Part name Description
22 [Fax] key Press to enter Fax mode. The indicator on the key lights up in
green to indicate that the machine is in Fax mode. (Available only
when fax kit FK-506 is installed)
23 [Scan] key/indicator Press to enter Scan mode. The indicator lights up in green to in-
dicate that the machine is in Scan mode. (Available only when net-
work interface card NC-503 or image controller IC-206 are
installed)
24 [Copy] key/indicator Press to enter Copy mode. The indicator lights up in green to in-
dicate that the machine is in Copy mode.
25 [123/ABC] key Press to switch between number input mode and letter input
mode.