Konica Minolta bizhub 181 - Manual (Page 10)

bizhub 181 x-9
Control panel
The control panel consists of the screen, which displays messages, and var-
ious keys, such as the [Start] key and the [Clear/Stop] key. The operations
that can be performed with these keys are described below. In this manual,
the names of control panel keys and power switches are indicated within [ ].
1 2 3 4 5
6
7
8
9
21
20
19
18 17 16 15 14 13 12 11 10
No. Part name Description
1 [Power Save] key/in-
dicator Press to enter Power Save mode.
2 [Mixed Original] key/
indicator Press to select the “Mixed Original” setting.
3 Simplex/Duplex key/
indicator Selects double-sided copying. Select “1-SIDE
‘
1-SIDE”, “1-
SIDE
‘
2-SIDE”, “2-SIDE
‘
1-SIDE” or “2-SIDE
‘
2-SIDE”. If any set-
ting other than “1-SIDE
‘
1-SIDE” is selected, the indicator lights
up.
4 Display Displays the number of copies, zoom ratio, setting menus and er-
ror messages.
5 [+], [,], [*] and [)]
keys
[OK] key Press the [+], [,], [*] and [)] keys to select menu items in the dis-
play and change their settings.
Press the [OK] key to apply the setting.
6 [Printer] key/indicator This indicator lights up while data is being printed from the com-
puter and flashes while data is being sent. For details, refer to the
User’s Guide for the printer driver.
7 [Access] key Press when account track settings have been applied.
8 [Speed Dial] key Press to register frequently used addresses, and to recall them
during transmissions. (Available only if image controller IC-206 or
network interface card NC-503 is installed.)
9 [Phone Book] key Press to display the information programmed for one-touch dial-
ing, group dialing and speed dialing.
10 [Back] key Press to return to the previous screen.
11 “Caution” indicator This indicator lights up or flashes if an error has occurred.