Asus P5B-E Plus - Manual (Page 25)

ASUS PB-E Plus -1
Onboard LED
The motherboard comes with a newly designed ASUS Power LED that lights up
in two colors to show the system power status. Blue indicates that the system is
in sleep/soft-off mode and red indicates that the system is ON. The ASUS Power
LED helps remind you to shut down the system and unplug the power cable before
removing or plugging in any motherboard component.
2.1 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Unplug the power cord from the wall socket before touching any
component.
• Use a grounded wrist strap or touch a safely grounded object or
a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
• Before you install or remove any component, ensure
that the ATX power supply is switched off or the power cord is detached
from the power supply. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
P5B-E PLUS
®
P5B-E PLUS Onboard LED
Sleep/Soft-OFF ON
(blue) (red)