beautypg.com

3 asus special features, 4 asus intelligent overclocking features – Asus P5B-E Plus User Manual

Page 22

background image

1-

Chapter 1: Product Introduction

1.3.3

ASUS Special features

ASUS MyLogo2™

This feature allows you to convert your favorite photo into a 256-color boot logo for

a more colorful and vivid image on your screen. See page 4-32 for details.

ASUS Multi-language BIOS

The multi-language BIOS allows you to select the language of your choice from the

available options. The localized BIOS setup menu helps you configure your system

easier and faster. See page 4-12 for details.

1.3.4

ASUS Intelligent Overclocking features

AI NOS™ (Non-Delay Overclocking System)

The patented ASUS Non-delay Overclocking System™ (AI NOS™) technology

auto-detects the CPU loading and dynamically overclocks the CPU speed when

needed. Unlike other dynamic overclocking techniques, AI NOS™ reacts much

faster to satisfy your need for speed. See page 4-17 and 5-20 for details.

PEG Link Mode

This feature enhances your PCI Express graphics card performance. It allows the

motherboard to automatically adjust the PCI Express graphics link mode to the

correct frequency based on the system configuration. Four additional settings are

available for overclocking the PEG Link Mode. See page 4-24 for details.

Precision Tweaker

This feature allows you to fine tune the CPU/memory voltage and gradually

increase the memory Front Side Bus (FSB) and PCI Express frequency at 1MHz

increment to achieve maximum system performance. See page 4-18 to 4-19 for

details.

C.P.R. (CPU Parameter Recall)

The C.P.R. feature of the motherboard BIOS allows automatic re-setting to the

BIOS default settings in case the system hangs due to overclocking. When the

system hangs due to overclocking, C.P.R. eliminates the need to open the system

chassis and clear the RTC data. Simply shut down and reboot the system, and the

BIOS automatically restores the CPU default setting for each parameter.

Due to the chipset behavior, AC power off is required before using C.P.R.

function.