Agri-Fab 45-0456 - Manual (Page 7)

7
FIGure 16
FIGure 14
FIGure 17
Attach the dump tube to the upper hopper frame 26.
using a U-clamp (34), 1/4" x 1-1/2" hex bolt (16) and
a 1/4" nylock nut (24).
Snap the dump handle clip onto the pivot rod. See
27.
figure 16.
24
27
16
34
Slide the handle grip (29) onto the end of the handle 24.
tube (9) as shown in figure 15.
Assemble the handle tube (9) to the dump tube (5)
25.
and secure in place with a 1/4" x 1" curved head bolt
(26) and 1/4" nylock nut (24).
FIGure 15
29
9
5
26
24
Slide the dump handle clip (33) over end of dump 23.
tube (5) until it is in the location shown in figure 14.
noTe: Some adjustment to the dump handle clip position
may be needed in a later assembly step.
Slide the pivot rod into each of the pivot rod retainers 28.
on the ends of the bag arm channels. See figure 17.
33
33
5