Chapter 4. completing the parts replacement, Chapter, Completing – Lenovo ThinkCentre M57p User Manual
Page 49: Parts, Replacement, Cable, Routing
Chapter
4.
Completing
the
parts
replacement
After
replacing
the
parts,
you
need
to
close
the
cover
and
reconnect
cables,
including
telephone
lines
and
power
cords.
Also,
depending
on
the
part
that
was
replaced,
you
might
need
to
confirm
the
updated
information
in
the
Setup
Utility
program.
Refer
to
″Using
the
Setup
Utility
program
″
in
the
User
Guide
for
this
product.
To
complete
the
parts
replacement:
1.
Ensure
that
all
components
have
been
reassembled
correctly
and
that
no
tools
or
loose
screws
are
left
inside
your
computer.
See
for
the
location
of
various
components.
2.
Make
sure
that
the
cables
are
routed
correctly
before
lowering
the
drive-bay
assembly.
Important
Correctly
route
all
power
supply
cables
to
avoid
interference
with
the
drive
bay
assembly.
Keep
cables
clear
of
the
hinges
and
sides
of
the
computer
chassis.
3.
Lower
the
drive-bay
assembly
and
position
the
drive
locks
to
the
locked
position.
Otherwise,
you
cannot
close
the
computer
cover.
4.
Close
the
computer
cover.
5.
If
a
cover
lock
is
installed,
lock
the
cover.
6.
Reconnect
the
external
cables
and
power
cords
to
the
computer.
See
Figure
36.
Cable
routing
©
Lenovo
2005,
2007.
Portions
©
IBM
Corp.
2005.
41