Acer Altos G310 - Manual (Page 75)

65
Select the strip value for the RAID 0 array by scrolling through the
available values by using the “up arrow” or “down arrow” keys. Press
the key to select and advance to the next field.
The available values range from 4KB to 128 KB in power of 2
increments. The strip value should be chosen based on the planned
drive usage. Here are some suggested selections:
• 16 KB - Best for sequential transfers
• 64 KB - Good general purpose strip size
• 128 KB - Best performance for most desktops and workstations
The default strip size is 128 KB.
From the Strip size, press the or key to advance to the
Create Volume prompt. The window will appear as follows:
BB!H421!.!FO/cppl!!Qbhf!76!!Gsjebz-!Nbz!8-!3115!!2;42!QN