Alloy Computer Products 16-PORT GIGABIT WEB SMART SWITCH GSS-16T2SFP - Manual (Page 28)

22
4-2-4. VLAN Group Configuration
Function name:
VLAN Group Configuration
Function description:
In port-based VLAN mode, this will display the ID – Description - and Members
of existing port-based VLAN groups. If in tag-based VLAN mode, this will
display the ID - Description – VID and Members of the existing tag-based VLAN
group. The switch can only be configured to support either port-based VLAN or
tag-based VLAN. When selecting one of the VLAN modes, the switch will
display the appropriate configuration data as required. You can easily create
and delete VLAN groups by using the and
function buttons, or click the Group ID directly to edit it.
Parameter description:
ID (Group ID):
When you want to edit a VLAN group, you must select the Group ID field.
Then enter your Tag Based VLAN Group Settings or Port Based VLAN
Group Settings depending on your VLAN mode selection.
Description:
The description defined by administrator is associated with a VLAN group.
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It appears
only in tag-based mode.
Member:
This is used to add or delete ports as members of this VLAN. Use the check
box (
; ) beside the port x to enable it.