Lenovo ThinkPad Tablet 2 - Manual (Page 54)

Removal steps of system board
In step 1 , peel off the film and disconnect the connector gently in the direction of the arrow.
4
4
5
5
2
3
1
Step Screw (quantity) Color Torque
4 M2 × 3 mm, flat-head, nylon-coated (2) Silver 0.181 Nm
(1.85 kgf-cm)
5 M2 × 3 mm, flat-head, nylon-coated (2) Silver 0.181 Nm
(1.85 kgf-cm)
In step 7 , disconnect the connectors by using the removal tool antenna RF connector or pick the connectors
with your fingers and gently unplug them in the direction of the arrows.
6
7
When installing: Ensure that the connectors are attached firmly.
48 Hardware Maintenance Manual