Lenovo ThinkServer TS130 User Manual

Page 11

Statement 16

CAUTION:
To reduce the risk of electric shock or energy hazards:

• This equipment must be installed by trained service personnel in a restricted-access location, as

defined by your local electrical code and the latest edition of IEC 60950.

• Connect the equipment to a reliably earthed safety extra low voltage (SELV) source. An SELV

source is a secondary circuit that is designed so that normal and single fault conditions do not
cause the voltages to exceed a safe level (60 V direct current).

• The branch circuit overcurrent protection must be rated in accordance with local electrical code

requirements.

• Use 1.3 mm

or 16 American Wire Gauge (AWG) copper conductor only, not exceeding 3 meters

in length.

• Torque the wiring-terminal screws to 1.4 newton-meters or 12 inch-pounds.

• Provide a readily available, approved and rated disconnect device in the field wiring.

Statement 17

CAUTION:
This product contains a Class 1M laser. Do not view directly with optical instruments.

Statement 18

CAUTION:
Do not place any object on top of rack-mounted products.

Statement 19

CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.