Lenovo V580c Notebook - Manual (Page 75)

Removal steps of DC-in connector
Disconnect the DC-in connector 1 , and remove the screw 2 . Then remove the DC-in bracket and DC-in
cable as shown in the following illustration.
2
4
4
3
1
Step Screw (quantity) Color Torque
2 M2 × 3 mm, flat-head, nylon-coated (1) Black 1.85 kgf-cm
1190 System board assembly
Important notices for removing the system board
When removing the system board, bear the following in mind:
• Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
• Avoid rough handling of any kind.
• At every point in the process, be sure not to drop or stack the system board.
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated
conductive surface.
Chapter 7 . Removing and replacing a FRU 69