Replace the printhead – Kodak ESP 3 User Manual
Page 46
Chapter 7
Replace the Printhead
If your printhead is damaged or broken it is easy to replace yourself.
1
Make sure the Kodak ESP 3 All-in-One printer is on.
2
Open the printer access door.
3
Pinch the latch on the ink cartridge with your thumb and forefinger and lift it out of the print
head. Remove both ink cartridges.
4
Unlatch the printhead by pressing by pressing the release button on the top center of the
carriage.
5
Remove the old printhead from the carriage.
40
Kodak ESP 3 All-in-One