Kodak ESP 9 - Manual (Page 11)

WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
www.kodak.com/go/aiosupport
11
8
Installing Software on WINDOWS OS
FOR WINDOWS & MA
CINT OSH
Start Printers and Faxes.
Right-click the icon for the printer you want to use as the default printer, and
then click Set As Default Printer.
Start Control Panel Hardware and Sound Printers.
Right-click on the printer you want to use, and then click Set As Default Printer.
Setting your KODAK All-in-One Printer as the default on your WINDOWS OS
WINDOWS XP:
WINDOWS VISTA:
Do not connect the USB cable to the printer
until instructed during software installation.
WINDOWS
a) Load the KODAK Inkjet Printer Software CD into the
CD-ROM drive. Follow the on-screen prompts when the
instructions appear.
If the KODAK Inkjet Printer Software installer window
does not open, click Start, then click Computer or My
Computer, and double-click on your CD-ROM drive.
b) If instructed, connect the USB cable to the USB port on
the printer and to your computer. Continue to follow the
on-screen prompts until installation is complete.
NOTE: If you are prompted by your fi rewall during software
installation, be sure to allow access. For additional
information go to
www.kodak.com/go/inkjetnetworking .
NOTE: If you have additional computers on your network,
install the KODAK Inkjet Printer Software on each computer.
The User Guide is installed with your KODAK Inkjet Printer
Software and is located here:
Start Programs Kodak User Guide