Direct printing (pictbridge) problems – Kodak P880 User Manual
Page 81

Troubleshooting
www.kodak.com/go/support
74
Direct printing (PictBridge) problems
Still having problems?
For Direct printing issues, contact the printer manufacturer.
Picture is not clear
■
To automatically set exposure and focus, press the Shutter button
halfway and hold. When the AE/AF indicator turns green, press
the Shutter button completely down to take the picture.
■
Clean the lens (
).
■
Make sure camera is not in Macro AF mode if you are outside of the
Macro AF setting or the Flower and Close-up mode specifications.
■
Make sure camera is not in Telephoto mode if you are closer than the
telephoto focus specification.
■
Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.
Status
Solution
Cannot locate desired picture.
■
Use the Direct print menu to change the image storage
location.
The Direct print menu display
turns off.
■
Press any button to redisplay the menu.
Cannot print pictures.
■
Ensure that there is a connection between the camera
and printer (
).
■
Ensure the printer and camera have power (
).
Camera or printer display an
error message.
■
Follow the prompts to resolve the issue.
If...
Try one or more of the following