Setting the iso speed, And iso speed (see – Kodak P880 User Manual
Page 48

41
www.kodak.com/go/support
Doing more with your camera
Setting the ISO speed
The ISO speed controls sensitivity of the camera sensor. Higher settings are more
sensitive to light, but may produce unwanted “noise” in a picture. Auto and SCN
mode settings automatically adjust the camera sensitivity to the light conditions.
Within PASM and C modes, the ISO button lets you adjust the setting.
NOTE: For rapid setting changes, see
.
ISO speed setting for selected picture size:
NOTE: For selecting Picture size, see
.
Fluorescent Corrects the green cast of fluorescent lighting. Ideal for indoor pictures
under fluorescent lighting without flash.
Click WB
Captures a representative white surface for a more precise setting.
Follow the screen prompts for Setup.
Custom
Uses a saved White balance setting that has been registered as a
Custom white balance (see table on
).
ISO
Picture size (MP)
ISO 50–400
3.1 MP, 5.0 MP, 7.1 MP, and 8.0 MP
ISO 400–1600
Available only in 0.8 MP
WB option
Description
Press ISO.
(Press again to exit.)
Press OK or Set.
2
to highlight an option.
3
1
The active icon is displayed
in the EVF/LCD screen.