Using the command dial for rapid setting changes – Kodak P880 User Manual
Page 50

43
www.kodak.com/go/support
Doing more with your camera
Using exposure compensation with exposure bracketing
In PAS modes, you can use exposure compensation in conjunction with exposure
bracketing.
Using the command dial for rapid setting changes
Use the Command dial in combination with other buttons for rapid setting changes.
NOTE: The Command dial is also used to adjust manual settings in PASM modes, see
.
If exposure
compensation is
set to
And if the exposure
bracketing interval is
set to 3 steps
Then the exposures taken
are
0.0
Set the drive mode to Exposure
bracketing 3 (see
–0.3, 0.0, +0.3
+1.0
+0.7, +1.0, +1.3
–1.0
–1.3, –1.0, –0.7
Function buttons that provide rapid setting changes:
•
Flash button (
)
•
Exposure metering button (
)
•
Focus button (
•
White balance button (
•
Drive button (
)
• Digital zoom button (
)
•
ISO button (
)
Command dial
•
Hold the Function button and
rotate the Command dial to
rapidly scroll through and select
an option in the function menu.
•
Release the Function button
to close the menu.