Changing the slide show display interval, Running a continuous slide show loop, Displaying pictures and videos on a television – Kodak CX7220 User Manual
Page 32: Copying pictures and videos
Reviewing pictures and videos
25
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can
increase the display interval to up to 60 seconds.
1 On the Slide Show menu, press
to highlight Interval, then press the
OK button.
2 Select a display interval. To scroll through the seconds quickly, press and
hold .
3 Press the OK button.
This setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, press
to highlight Loop, then press the OK
button.
2 Highlight On, then press the OK button.
The next time you run a slide show, it repeats until you press the OK button or
until battery power is exhausted. This setting remains until you change it.
Displaying pictures and videos on a television
You can display pictures and videos on a television, computer monitor, or any
device equipped with a video input using a compatible Kodak EasyShare
printer dock and an optional audio/video (A/V) cable. See the printer dock
user’s guide for details. (Image quality on a television screen may not be as
good as on a computer monitor or when printed.)
Purchase these and other accessories at a dealer of Kodak products, or visit
.
Copying pictures and videos
You can copy pictures and videos from a card to internal memory or from
internal memory to a card.
Before you copy, make sure that:
■
A card is inserted in the camera.
■
The camera’s image storage location is set to the location from which you
are copying. See