Kodak CX7220 - Manual (Page 17)

Taking pictures and videos
10
Using the camera screen as a viewfinder
NOTE: To prolong battery life, use the Liveview feature sparingly.
1 Turn the Mode dial to any Still mode.
2 Press the OK button to turn on the camera
screen.
3 Frame your subject in the camera screen.
4 Press the Shutter button halfway and hold
to set the exposure and focus.
When the framing marks turn red, focus is
accomplished.
5 Press the rest of the way down to take the
picture.
NOTE: Framing marks appear only when the camera screen is on.
Framing marks do not appear in Landscape or Video mode.
■ To turn off the camera screen, press the OK button.
To make the camera screen turn on whenever the camera is on, see Liveview,
page 18 .
Reviewing the picture or video just taken
After you take a picture or video, it appears on the camera screen for
approximately 5 seconds. While it is displayed, you can:
■ Review: If you take no action, the picture/video is saved.
■ Play (video): Press the OK button to play the video.
■ Share: Press the Share button to tag a picture/video for email, or as a
Favorite, or to tag a picture for print (see
page 29 ).
■ Delete: Press the Delete button while the picture/video and are
displayed.
NOTE: Only the final picture of a burst series (see page 14 ) is displayed. If you select Delete, all
pictures in the burst series are deleted. To delete selectively, do so in Review (see
page 21 ).
OK button Framing marks