Kodak LS633 - Manual (Page 86)

74
Chapter 9
Transferring Pictures
After the Kodak EasyShare software is loaded on your computer (see page 63 ),
you can transfer pictures and videos from your camera to your computer.
1 Turn off the camera and place it in the
camera dock.
2 Push the Transfer button.
The Transfer light blinks green while the
pictures and videos are transferring.
Messages about the transfer status appear
on the camera screen. Kodak EasyShare
software automatically opens on your
computer.
NOTE: After transferring, the camera dock resumes charging as necessary.
Transfer Light Status
Transfer
button
Transfer
light
Light Cause
Steady The camera is properly seated in the camera dock. The camera
dock is connected to AC power and to a computer via the USB
cable.
Blinking Pictures are being transferred to the computer.
Off The camera is not seated in the camera dock ( page 72 ).
The camera dock is not plugged into AC power ( page 71 ).
The USB cable is not connected ( page 71 ).