Connecting the camera dock 6000 – Kodak LS633 User Manual
Page 83
71
Chapter 9
Connecting the Camera Dock 6000
After the Kodak EasyShare software is loaded (see
), connect the
camera dock to your computer and to a power outlet. You need:
m
The USB cable included with your camera
m
The 5-volt AC adapter included with the camera dock
IMPORTANT: Make sure your camera is NOT in the camera dock
when you are connecting to power and the computer.
1
Plug the labeled end of the USB cable
into the labeled USB port on your computer.
See your computer user’s guide for details.
2
Plug the other end of the USB cable into the
square USB connector on the back of the
camera dock.
3
Plug the AC adapter into the round power
connector on the back of the camera dock
and into a power outlet.
Your AC adapter may differ from the one
pictured or may have additional plugs.
Use the plug that accommodates your
type of power outlet.
IMPORTANT: Use only the 5-volt AC adapter included with the
camera dock 6000. Other adapters may cause damage
to your camera, camera dock, or AC adapter.