Kodak LS633 - Manual (Page 46)

34
Chapter 2
Setting Long Time Exposure
Use Long Time Exposure to control how long the shutter stays open and to
portray a sense of motion. Settings are: None, 0.5, 1, 2, and 4 seconds.
NOTE: Long Time Exposure cannot be used with Exposure Compensation or
manual ISO speed setting. For the best picture quality, Long Time
Exposure ISO speed is fixed at 100.
Set Long Time Exposure
1 In any Still mode, press the Menu button.
2 Press to highlight Long Time Exposure , then press the OK
button.
3 Press to select an option, then press
the OK button.
4 Press the Menu button to exit the menu.
Take the Picture
1 Place the camera on a flat surface or use a tripod.
2 Use the camera screen to frame your subject. Press the Shutter button
half-way and hold
to set the focus. Press the rest of the way down
to take the picture.
This setting remains until you change the Mode dial or turn off the
camera.
Default flash setting: Off
Available flash settings: Auto, Flash Off, Fill Flash, Red-eye
Camera returns to default: When you change modes or turn off the
camera.