Actiontec electronic Actiontec Wireless DSL Gateway GT704WG User Manual
Page 44
38
Actiontec 54 Mbps Wireless DSL Gateway User Manual
39
Chapter 5 Configuring Advanced Settings
QoS (Quality of Service) allows the prioritization of certain types of data traf-
fic (such as VoIP traffic) over other types of traffic (such as standard data). Both
upstream (data coming into the network) and downstream (data going out of the
network) traffic can be prioritzed using QoS.
Enable QoS
Clicking in this check box activates/deactivates QoS.
Trusted Mode
If “Trusted Mode” is activated, all data traffic set to an
IP
precedence level of 5 will
be recognized as high priority traffic, regardless of
IP
or
MAC
address rule settings
(used for VoIP only).
Total Available Bandwidth
Displays the total amount of available bandwidth (in kilobits per second).
High Priority Bandwidth
Enter the amount of high priority bandwidth to be used by the prioritized
traffic type (cannot exceed total available bandwidth).
Priority
Always set to “High” and cannot be changed.
Protocol
Select the data type being configured. Options:
ALL
,
TCP
,
UDP
,
GRE
,
ICMP
.
Set IP Precedence
Click in the check box, then select the precedence level (1-low through 7-high).