Actiontec electronic Actiontec Wireless DSL Gateway GT704WG - Manual (Page 16)

10
Actiontec 54 Mbps Wireless DSL Gateway User Manual
11
Chapter 2 Performing a Quick Setup
Changing the Password
To create or change the password allowing access to the Gateway’s Web
Configuration screens, follow these instructions:
1. From the “Home” screen, select Security.
2. The “Security” screen appears. Select “Admin User Name and Password.”
3. The “Change Admin Username/Password” screen appears. Enter a new
Username in the “Admin User Name” text boxt, then enter a new password in
the “Admin Password” text box. Make sure to write down the user name and
password and keep it in a secure location. They will be needed to access the
Gateway’s Web Configuration screens in the future.
4. Click Apply at the bottom of the screen.
5. Read the instructions on the next screen. The user name and password are
successfully changed.
Once the Gateway has rebooted, the new user name and password are active. To
access the Gateway’s Web Configuration screens, the new user name and password
must be entered.