Power on by ps/2 keyboard [disabled, Power on by ps/2 mouse [disabled, Restore on ac power loss [last state – Asus A8N-VM User Manual

Page 70: Cpu temperature [xxxºc/xxxºf] or [ignored

2 - 3 2

C h a p t e r 2 : B I O S s e t u p

2.5.6

Hardware Monitor

Select Screen
Select Item

Change Field

General Help

F10 Save and Exit
ESC Exit

BIOS SETUP UTILITY

Power

Hardware Monitor

CPU Temperature

[51ºC/122.5ºF]

MB Temperature

[41ºC/105.5ºF]

CPU Fan Speed

[3813 RPM]

CPU Q-Fan Control

[Disabled]

CPU Target Temperature

[50ºC]

Chassis Fan Speed

[N/A]

VCORE Voltage

[ 1.320V]

3.3V Voltage

[ 3.345V]

5V Voltage

[ 5.094V]

12V Voltage

[11.880V]

CPU Temperature

Power On By PS/2 Keyboard [Disabled]

When set to [Enabled], this parameter allows you to use the PS/2
keyboard to turn on the system. This feature requires an ATX power supply
that provides at least 1A on the +5VSB lead. Configuration options:
[Disabled] [Enabled]

Power On By PS/2 Mouse [Disabled]

When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]

Restore On AC Power Loss [Last State]

When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]

CPU Temperature [xxxºC/xxxºF] or [Ignored]

CPU Temperature [xxxºC/xxxºF] or [Ignored]
MB Temperature [xxxºC/xxxºF] or [Ignored]

MB Temperature [xxxºC/xxxºF] or [Ignored]

The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select Disabled if you do not wish to
display the detected temperatures.