Asus A8N-VM User Manual

Page 34

1 - 2 4

C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n

5 .

C P U a n d C h a s s i s f a n c o n n e c t o r s

C P U a n d C h a s s i s f a n c o n n e c t o r s
( 3 - p i n C P U _ F A N , 3 - p i n C H A _ F A N )

( 3 - p i n C P U _ F A N , 3 - p i n C H A _ F A N )

( 3 - p i n C P U _ F A N , 3 - p i n C H A _ F A N )
The fan connectors support cooling fans of 350mA~740mA (8.88W
max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan
cables to the fan connectors on the motherboard, making sure that the
black wire of each cable matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on the
fan connectors.

6 .

D i g i t a l a u d i o c o n n e c t o r ( 4 - 1 p i n S P D I F _ O U T )

D i g i t a l a u d i o c o n n e c t o r ( 4 - 1 p i n S P D I F _ O U T )
This connector is for an additional Sony/Philips Digital Interface
(S/PDIF) port(s). Connect the S/PDIF module cable to this connector,
then install the module to a slot opening at the back of the system
chassis.

The S/PDIF module is purchased separately.

A8N-VM

A8N-VM Fan connectors

CPU_FAN

CHA_FAN

GND

Rotation

+12V

GND

Rotation

+12V

CPU_FAN

CHA_FAN

A8N-VM

A8N-VM Digital audio connector

+5V

SPDIFOUT

GND

SPDIF_OUT