Vollrath Mirage Drop-In Induction Warmers 7 Qt - Manual (Page 4)

O
peratOr
’
s
M
anual
4
ENGLISH
Changing the temperature from ºF to ºC or ºC to ºF
1. Press the ON/OFF button (A) to turn on the unit. See Figure 1.
2. Press the function button (B) to change from ºF to ºC.
Locking and Unlocking the unit
1. Press the ON/OFF button (A) to turn on the unit. See Figure 1.
2. Select the preset program or warming temperature desired.
3. To lock the unit: At the same time press and hold the function button (B)
and the arrow down button (C) until the lock light (I) appears. The control
can not be changed until the unit is unlocked.
4. To unlock the unit: At the same time press and hold the function
button (B) and the arrow down button (C) until the lock light (I)
disappears. Or, turn the unit off and on again. The control can now be
changed.
c
leaning
To maintain the appearance and increase the service life, clean your
induction range daily.
WARNING
Burn Hazard.
Do not touch cookware, heating surface, food, or
liquid while heating.
Hot food and liquids can burn skin. Induction heating surfaces heat
very rapidly. Allow the heating surface to cool before handling.
WARNING
Electrical Shock Hazard.
Keep water and other liquids from entering the
inside of the unit. Liquid inside the unit could cause
an electrical shock.
Do not spray water or cleaning products. Liquid could contact the
electrical components and cause a short circuit or an electrical
shock.
1. Unplug the unit and let it completely cool.
2. Wipe the unit exterior with a clean damp cloth.
NOTE:
Do not put water in the warmer/rethermalizer. It is intended to run
dry. Water will damage the unit and void the warranty.
3. Wipe the inside of the unit with a clean damp cloth.
4. Do not use abrasive materials, scratching cleansers or souring pad to
clean the unit. These can damage the finish.
5. Thoroughly wipe off any mild soap or chemical cleaners. Residue could
corrode the surface of the unit.