Acer Altos G510 series - Manual (Page 126)

Appendix B: Altos G510 Rack Installation Guide 116
leave them loose enough to allow length adjustment when
installing the mounting rails to the rack.
Attach the other rack brackets to the remaining mounting rail.
9 Install the mounting rails to the rack using four M6 x L10 (4 on
page 113) screws and cage nuts (two at each end) for each
mounting rail.
Installing cage nuts
Cage nuts are used to secure system and other components to the
vertical rails in the rack.
To install cage nuts:
• Insert the lower lip of the cage nut over the bottom of the
opening at the back of a rail.
• With your fingers, pinch the cage nut rack fastener and push
in until the top lip locks into position.
• Repeat this process to install the other cage nuts in their
appropriate locations.
BB!H621!.!FO/cppl!!Qbhf!227!!Xfeoftebz-!Kbovbsz!9-!3114!!21;63!BN