Asus P5GD2 - Manual (Page 127)

A S U S P 5 G D 2 A S U S P 5 G D 2 A S U S P 5 G D 2 A S U S P 5 G D 2 A S U S P 5 G D 2 5 - 2 3 5 - 2 3 5 - 2 3 5 - 2 3 5 - 2 3
Entering the ITE Entering the ITE Entering the ITE Entering the ITE Entering the ITE ® ® ® ® ® 8212F Setup Utility 8212F Setup Utility 8212F Setup Utility 8212F Setup Utility 8212F Setup Utility
To enter the ITE ® 8212F Setup Utility:
1. Boot up your computer.
2. The ITE8212F controller scans for IDE devices attached on the IDE
RAID ports. When prompted, press or to display
the main menu of the utility.
Auto Configuration...........[ 1 ]
Define RAID..................[ 2 ]
Delete RAID..................[ 3 ]
Rebuild RAID.................[ 4 ]
RAID Card Configuration......[ 5 ]
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
[1]..[5] Select [ESC] Exit
[MAIN MENU]
5.5.3 5.5.3 5.5.3 5.5.3 5.5.3 ITE ITE ITE ITE ITE ® ® ® ® ® 8212F RAID configurations 8212F RAID configurations 8212F RAID configurations 8212F RAID configurations 8212F RAID configurations
The ITE ® 8212F IDE RAID controller supports RAID 0, RAID 1, RAID 0+1 and
JBOD configurations. Use the IT8212 BIOS Setup Utility or the ATA RAID
Manager application to configure a disk array.
Setting the BIOS RAID items Setting the BIOS RAID items Setting the BIOS RAID items Setting the BIOS RAID items Setting the BIOS RAID items
After installing the hard disk drives, make sure to set the necessary RAID
items in the BIOS before setting your RAID configuration.
To set the BIOS RAID items:
1. Boot the system and press during the Power-On Self-Test
(POST) to enter the BIOS Setup Utility.
2. From the Advanced > Onboard Devices Configuration A d v a n c e d > O n b o a r d D e v i c e s C o n f i g u r a t i o n A d v a n c e d > O n b o a r d D e v i c e s C o n f i g u r a t i o n A d v a n c e d > O n b o a r d D e v i c e s C o n f i g u r a t i o n A d v a n c e d > O n b o a r d D e v i c e s C o n f i g u r a t i o n menu
in the BIOS, set the I T E 8 2 1 2 F C o n t r o l l e r I T E 8 2 1 2 F C o n t r o l l e r I T E 8 2 1 2 F C o n t r o l l e r I T E 8 2 1 2 F C o n t r o l l e r I T E 8 2 1 2 F C o n t r o l l e r item to RAID Mode. See
section “4.4.6 Onboard Devices Configuration” for details.
3. Save your changes and exit Setup.