Silent Call 1008-4 User Manual
Page 14
14
General Information
Before installing detectors, please thoroughly read these installation
instructions and NFPA 72, which provides detailed information on
detector spacing, placement, zoning, wiring, and special applications.
NOTICE: This manual should be left with the owner/user of this
equipment.
IMPORTANT: This detector must be tested and maintained regularly
following NFPA 72 requirements. The detector should be cleaned at
least once a year.
General Description
The Model #1008-4 photocell electronic smoke detector with built-in
wireless transmitter is intended for use with any Silent Call receiver
to form an alerting system. The transmitter will send alarm condition
messages to the system’s receiver. Refer to the wireless system’s
instructions for the maximum number of transmitters that can be
supported.
The Model #1008-4 incorporates a state of the art optical sensing
chamber and an advanced microprocessor. The microprocessor allows