Seiwa Marlin(v.16.31) - Manual (Page 10)

10 - Addendum
A.2 NOTES
PAG 23
1.5 SELECTING THE LANGUAGE
The catution message changed in:
CAUTION
If you have accidentaly selected an unknown language, and you are not able to select your preferred
language please see Chapter 7 “Maintenance” for a RAM Clear operation: the chart plotter will also
return all selections, in particular language, to original default values. RAM Clear operation will also
cancel all the saved data like ROUTE, WAYPOINTS, MARKS, etc.
PAG 29
1.13 RANGE/BEARING FUNCTION
A Note was added:
NOTE 2: if R/B object was created in Cursor mode, then it will stay at current cursor position; if R/B
was created in Fix mode then R/B will follow Fix position (move with the ship).
PAG 34
2.2 ROUTES
FOLLOWING A ROUTE
New softkey function:
Forward or Backward to select direction of following the Route.
PAG 89
5.6.11 TRANSDUCER SETUP MENU
New menu option:
Sonar Resolution: 4 bit / 8 bit