MyWeigh AXE300 - Manual (Page 4)

When an applied load exceeds the capacity. "EEEE" will appear on the display. Remove the excessive
load immediately!
!Remember: You can permanently damage the scale by overloading it!
* Negative Value
Any tarred value or a value left in memory will be displayed as a negative number once all weight is
removed from the unit. Press tare to re-Zero the unit.
* Auto off
An auto shut off feature is provided to conserve battery power. The unit will automatically turn off after
approximately 3 minutes of inactivity.
*Stable Indicator
There is a stable indicator that appears on the left side of the LCD whenever the scale is stable and at
Zero
KEY PAD FUNCTIONS
* UNIT (the left key)
Unit (mode) selection: Press and hold the left key to change weight unit You can select g (grams), oz
(ounces), dwt (pennyweight) or ct (carats).
* ON/OFF
Press this key to turn unit on. Once the unit is on, press and hold the same key for 5 seconds to turn the
scale off
* Tray Operation:
The spinning locking mechanism of the AXE is designed to protect the scale from accidental overload
when it is closed.
Simply spin the cover counter clockwise so that the LCD and buttons will be hidden from view. The scale
is now ready for storage
To operate the sale simply spin the cover clockwise until it is fully open (you’ll feel it lock into place).
Now the scale is ready for use.
NOTE: Always close the cover when storing the scale. Please be sure the cover is fully open before
operation.