MyWeigh TEMPEST User Manual
Page 5
There is a platform expansion tray and bowl included in the box. They are designed to fit on top of the
platform. Simply install the tray or bowl and then turn the scale ON.
***IF YOU HAVE QUESTIONS OR NEED ASSISTANCE PLEASE VISI
CAN
USUALLY HELP YOU FIX YOUR SCALE VERY QUICKLY SO PLEASE CONTACT US IF YOU NEED ANY HELP. IF
YOU WANT TO LEARN MORE ABOUT YOUR SCALE OR NEED REPLACEMENT PARTS, VISIT
There is an advanced troubleshooting and programming guide available online for this scale at our
website.
Words of Advice:
The Tempest 250 is undoubtedly one of the coolest pocket scales ever created and the first of it’s kind.
Please remember that this is a precision instrument. It is essential that you never drop, shake or
otherwise mishandle this instrument. Electronic precision scales use delicate sensors that can easily be
damaged if the scale is excessively shocked, dropped or overload. An abused scale will only work until
it’s sensors are damaged, but a well kept scale will last for your lifetime.
Please be good to your Tempest !
My Weigh is the Best Weigh !
**Procedure of full calibration for Tempest**
In Programming mode pressing the MODE key will increase the blinking number, Pressing the TARE key
will shift the blinking number to the next line. If you press the MODE key it simply increases the number.
So if the blinking number is 1 and you press the MODE key, it will increase that number to 2. The TARE
key shifts the blinking digit to the next line.
1. Turn on the scale and wait for 0.0g.
2. Press and hold TARE for 5 sec.
3. Page 1 = 7115. If it does not show the correct number, use TARE (shift digit) and MODE (adjust value)
to change it. Press BACKLIGHT.
4. Page 2 = 8295. If it does not show the correct number, use TARE (shift digit) and MODE (adjust value)
to change it. Press BACKLIGHT .
5. Page 3 = XXXX, Do not change it. Press BACKLIGHT.