MyWeigh TEMPEST User Manual
Page 2
OPERATION AND CALIBRATION INSTRUCTIONS
This scale is very easy to operate. However, there are certain caring and operation instructions you
should read before your first use
We know taking the time to read these instructions is time
consuming, but this scale is a precision instrument and must be handled with the utmost care.
IMPORTANT:
1) To open the scale, simply lift up the cover.
2) Always empty the tray/platform before turning the power on (clear the platform before turning on).
3) Do not get the scale wet or hot and do not operate on any wet or hot surface. To clean the scale, wipe
the surface with a clean damp cloth or mild non-abrasive cleaner. Do not use any abrasive cleaner
because it may damage the finish.
4) Do not overload the scale. That is, do not place anything that weighs more than 250 grams on the
platform. You may permanently damage the load cell.
5) Handle the scale with care. This is a precision instrument and should never be dropped or otherwise
mishandled.
6) Do not leave anything on the scale when not is use.
7) If the scale is excessively cold or hot, allow the scale to warm up to normal room temperature for at
least 1 hour prior to use.
8) Do not operate a cell phone or cordless phone within 10 feet of the scale**** It may temporarily
cause the scale to malfunction.
9) If the scale ever reads “Lo” or weighs very slowly, please replace the batteries.
10) In the unlikely event that the scale permanently “locks up” or shows ERR, vis
for Advanced Troubleshooting.
11) If your scale should require recalibration, please refer to the calibration guide on the next page.
12) Please keep your scale in it’s protective pouch when not in use.