MyWeigh TEMPEST - Manual (Page 3)

INSTRUCTION MANUAL
1. Do not put anything on the scale tray before you turn it on.
2. Turn the scale on by pressing . After 2 seconds, the display will read “0.0g”.
3. Always allow the scale to warm up for at least 30 seconds before weighing for accuracy & stability.
4. Place the item to be weighed on the center of the platform and read the value on the display.
5. TARE Function: If you need to weigh loose items or anything in a container or tray you should: 1) Turn
the scale ON. 2) Place the empty container or tray on the platform. 3) Press the TARE button. 4) Place
the items to be weighed into the container / tray. 5) The exact weight of the items will show. (use your
tweezers to handle all gems)
6. The scale has an Auto-Off feature that turns off the scale after lapses of non-activity. If the scale is in a
room with wind or air movement, it may sense the pressure of the air and not auto-off. In this case
simply press to turn the scale off manually.
7. MODE Function: This scale has the ability to weigh in grams or ounces. The selection is done by simply
pressing the MODE key once the scale is on (Look for the g, oz, ozt, dwt or ct on the top of the display).
8. BACKLIGHT: The backlight will be automatically turned on whenever the reading change is more than
0.5g. You can also turn it on manually by pressing the key. The backlight will automatically turn off
after a few seconds. If you want to save the battery life, you may turn off the backlight power using the
manual backlight-disable switch on the bottom of the scale.
9. Temperature: The recommended operating temperature is 64-82F (16-25C). Please only operate the
scale at recommended temperatures.
CAPACITY OF SCALE: 250G ACCURACY: +/- 0.1g