MSI 945GC Networks User Manual
Page 41
3-7
BIOS Setup
Hyper-Threading Technology
The processor uses Hyper-Threading technology to increase transaction rates
and reduces end-user response times. The technology treats the two cores
inside the processor as two logical processors that can execute instructions
simultaneously. In this way, the system performance is highly improved. If you
disable the function, the processor will use only one core to execute the
instructions. Please disable this item if your operating system doesn
’t
support HT Function, or unreliability and instability may occur.
IDE Configuration
ATA/IDE Configuration
This setting specifies the operation mode of the SATA port.
Configure SATA as
s
This setting specifies the function of the on-chip SATA controller.
Primary/Second IDE Master/Slave, Onboard SATA# 1/2
[Type]
Press PgUp/<+> or PgDn/<-> to select
[Manual], [None] or [Auto] type. Note that the
specifications of your drive must match with
the drive table. The hard disk will not work
properly if you enter improper information for
this category. If your hard disk drive type is
not matched or listed, you can use [Manual] to
define your own drive type manually.
PDF created with pdfFactory Pro trial versi