Actiontec electronic NS100-160 User Manual
Page 29
26
Actiontec Network Attached Storage Device User Manual
27
Chapter 3 Using the Administrative Utility
Sync Now
Click this button to synchronize with the
NAS
Device immediately.
Send E-Mail Alerts…
Click here to enable the sending of e-mail alerts by the
NAS
Device. Alerts will be
sent when there is some problem requiring the administrator’s attention.
E-Mail Address (1)/(2)
Enter the e-mail addresses to which the alerts will be sent.
Subject
Enter the text that will appear in the “Subject” text box of an e-mail alert.
Enable WINS
Click here if the network has a
WINS
Server. If enabled, the
NAS
Device will regis-
ter with the
WINS
Server. This will allow users on the network to locate the Device
through a router. (Without
WINS
, “Network Neighborhood” or “My Network
Places” only scans the local network.)
WINS Server
If
WINS
is enabled, enter the
IP
address of the
WINS
Server. Normally, this will be a
Windows
NT
/2000/
XP
Server.
Enable Guest Logins
If enabled, “guest” can be used as user
ID
to login to the
NAS
Device. If disabled,
“guest” will not be accepted as a login.
Convert Failed Logins to “Guest” Logins
If this option is enabled, all Windows users will be able to access the
NAS
Device
via “Network Neighborhood” or “My Network Places,” with “guest” access rights.
By default, the “guest” user has read/write permission to the “Disk” folder on the
USB
hard drive, and all folders on the
USB
flash drive.