Adding a print server – Actiontec electronic NS100-160 User Manual
Page 13
10
Actiontec Network Attached Storage Device User Manual
11
Chapter 2 Configuring the NAS Device
☞
Note: If the
USB
device is not removed, it will not be re-con-
nected. The USB device must be removed and re-inserted to re-
connect.
Adding a Print Server
If a
USB
printer is connected to the
NAS
Device, the Device can be used as a print
server. To do this, follow these instructions (this installation is for Windows
XP
only
; other operating systems may have a slightly different procedure):
1. Plug a
USB
printer in the
USB
port on the rear panel of the
NAS
Device.
2. From the desktop of the computer, select Start, then Printers.