Using the administrative utility, Accessing the administrative utility – Actiontec electronic NS100-160 User Manual

Page 18

Text mode
Original mode

Using the
Administrative Utility

This chapter describes using the

NAS

Device’s Administration Utility. With the

Utility, the administrator can check the

NAS

Device’s status, add or delete users, or

create user groups.

Accessing the Administrative Utility

To establish a connection from a computer to the

NAS

Device:

1. Open a Web browser.

2. In the Address text box, enter “http://” and the

NAS

Device's

address. If

using the default

address, enter:

http://192.168.0.100

☞

Note: If the port number used by the Device has been changed
(on the System screen) from the default (80), specify the correct
port number when connecting.
For example, if the current port is 8080:

http://192.168.0.100:8080

3. Once connected, the following screen is displayed.

This manual is related to the following products:

NS100-250 NS100-400 NS100-200 NS-100 NS100-300