iRobot Looj User Manual
Page 7
1
iRobot Looj Owner’s Manual
www.irobot.com
1
to remove the remote control handle from Looj:
Press release trigger and slide remote
control handle away from auger.
Attaching the Auger
Using the Remote Control Handle
The remote control handle detaches from Looj and is used to command the
robot from a distance of up to 75 feet, depending upon interference and
environmental conditions. The remote control handle keeps your hands clean
and makes it easy to place the robot in and out of the gutter using only one
hand. Install two AAA alkaline batteries (not included) in the remote control
handle before operating.
Always use the same brand of batteries in the remote control handle.
Don’t mix battery types or brands. Use fresh batteries for maximum
performance and range.
to attach the remote control handle to Looj:
1. Hold the remote control handle and align the front edge with the
mark on the robot.
2. Slide the remote control handle onto the robot.
3. Let go when you hear a snap indicating that handle is in place.
tiP: Make sure handle is securely attached to the robot before picking
up the robot.
Insert AAA batteries into
the remote control handle
as shown.
Release Trigger
Push the auger onto the robot shaft until you feel it snap into place or
hear a click.