iRobot Verro 600 - Manual (Page 9)

www.irobot.com
Using Verro
(cont...)
6 Ensure the Power Supply at least 12 feet from the pool and plug it into a GFCI outlet.
Ensure the electric outlet has been properly grounded. Never leave the Power Supply
plugged in when Verro is not in use.
Press the green Power button to start Verro; the light on the Power Supply will illuminate
and Verro will start. The length of the cleaning cycle will vary based on pool size. To
stop Verro before the end of the cleaning cycle, press the red Power button on
the Power Suppy.
Light
Floating
Power Cord
Socket
On
Off
lIGHT: Light indicates that
robot is ON.
On: Green button turns
robot ON.
OFF: Red button turns
robot OFF.
Plug the floating power cord in the Power Supply. Be sure not to force the plug as it will only
go in one way. Once the plug is fully seated, turn the locking collar clockwise to lock it.
Push and rotate clockwise
warning: a Ground Fault Current Interrupter (GFCI) must be installed to
protect your electric outlet and prevent any possible electric shock.