iRobot Verro 600 - Manual (Page 4)

iRobot Verro Owner’s Manual
Tips
Tip
Clean the filter bag regularly. Verro uses the force of the water pumped through its filter bag
to maintain traction, particularly on the walls of the pool. If the filter bag is not kept clean,
Verro will not clean properly and will not be able to climb the walls of the pool.
Tip
Change the direction of the handle before each cleaning run to prevent the floating power
cord from becoming twisted and to improve coverage of the entire pool. (p. 8)
Tip
Store Verro in a dry place out of direct sunlight at a temperature between 50 and 104
degrees Fahrenheit. The Power Supply is water resistant, but not waterproof and may be
damaged by rain. Important: Failure to properly store Verro will result in loss of warranty.
Tip
iRobot recommends using the mesh filter bag (available separately at www.irobot.com)
when the pool contains a significant quantity of large debris (leaves, etc.), such as when
the pool is opened for the season. The fine filter bag is ideal for filtering small debris
(algae, sand, etc.) and for regular maintenance.
Tip
Periodically straighten the floating power cord with the Detangler.