iRobot Verro 300 - Manual (Page 22)

iRobot Verro Owner’s Manual
Troubleshooting
(cont...)
Problem Likely Cause What to Do
Verro reverses
direction before
reaching end of pool
The filter bag needs to
be cleaned
Time control dial is
not set properly
Flaps in the vacuum
intakes at bottom of
robot are blocked
Wheels or axles are not
turning freely
The pump impeller is
fouled by dirt or debris
Clean the filter bag. (p. 13)
Set the time control dial. (p. 12)
Check the flaps in the vacuum intakes.
(p. 20)
Check wheels and axles for dirt
and debris.
Clean the pump impeller. (p. 17)
Verro waits too long
at side of pool before
changing direction
The filter bag needs to
be cleaned
Time control dial is not
set properly
Flaps in the vaccum
intakes at bottom of
robot are blocked
Wheels or axles are not
turning freely
The pump impeller is
fouled by dirt or debris
Clean the filter bag. (p. 13)
Set the time control dial. (p. 12)
Check the flaps in the vacuum intakes.
(p. 20)
Check wheels and axles for dirt and debris.
Clean the pump impeller. (p. 17)
Verro does not
reverse direction
The direction baffle is
impeded
Check the direction baffle. (p. 20)
Verro is not
vacuuming well
The filter bag needs to
be cleaned
Flaps in the vacuum
intakes at bottom of
robot are blocked
The pump impeller is
fouled by dirt or debris
Clean the filter bag. (p. 13)
Check the flaps in the vacuum intakes.
(p. 20)
Clean the pump impeller. (p. 17)