iRobot Mirra 530 - Manual (Page 14)

14 iRobot Mirra 500 Series Owner’s Manual
grounding
The power supply must be connected to a grounded 3 conductor socket. The main
power supply must be connected via a GFCI (ground fault circuit interrupter) or RCD
(residual current device) having a rated residual operating current not greater than 30mA.
Maintenance and safety
The cover should not be removed except by an authorized service agent or trained and
qualified person. No internal adjustment or component replacement can be carried out by
the user. The power cable must be disconnected before removing the cover. If the power
supply cord is damaged, it must be replaced by an authorized service agent or trained and
qualified person. Do not operate the supply if the cord is damaged.
Environmental conditions
The power supply is designed to work both indoors and outdoors. However, the unit should
not be operated in direct sunlight or be exposed to water. The power supply should not be
operated in an ambient temperature in excess of 40ºC.
Physical
Dimensions (W * D * H) _______
Weight ___________________
Electrical
Input rating ________________
Output rating _______________
Storage temperature _________
Operating temperature ________
Ingress protection ___________
273mm * 242mm * 90mm
10.75in * 9.53in * 3.54in
1.9 Kg / 4.19 lbs
100-240V~, 50/60Hz, 210W
29V, 6.3A
-10°C - 60°C (14°F - 140°F)
0°C - 45°C (32°F - 113°F)
IP54
Power Supply