iRobot Mirra 530 - Manual (Page 11)

global.irobot.com 11
Operating Your Pool Cleaner - Plugging the Cable
cable
plug
power supply
socket
cable
plug
power supply
socket
slot
key
slot
key
Push and rotate
right to lock
Rotate left and
pull to unlock
Cable plug (A)
Socket (B)
Plug Type
To plug the cable (Fig A) into the socket on the power supply (Fig. B), please do the following:
1. Prepare the plug as seen in (Fig. C) with the key and 3 outside slots exactly as shown.
2. Fit exactly the key and the slots from cable plug with the corresponding key and slots from the
power supply socket. (Fig. D)
3. Push the plug all the way into the socket of the power supply.
4. Once the plug is in, rotate the plug to the right to lock it into place (Fig. E).
5. To remove the plug, first rotate the plug to the left to unlock it, then pull it out (Fig. F).
A B C D E
F