iRobot Braava 300 Series User Manual
Page 5
global.irobot.com
5
• Make sure the cleaning cloth does not drape into the middle channel
between the gripping strips as this could impede sensor functions and
safe operation. See page 18 for further detail.
• When mopping, do not use Braava in areas where wetness can damage
unfinished or unsealed floors or delicate carpeting or rugs.
• Operate at room temperature. Do not expose Braava or its batteries to
freezing or extreme heat.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
BATTERY AND CHARGING
• Charge using a standard U.S. (120V AC) outlet only.
• Only use the included adapter to charge Braava. Braava 320 and 380t
chargers are not cross-compatible.
• Only use rechargeable battery packs approved by the manufacturer.
• Do not use an adapter with a damaged cord or plug.
• Do not handle or charge Braava when hands are wet.
• Always disconnect Braava from the adapter before cleaning.
Notice: Braava contains a software interface for the purpose of enabling
the manufacturer to provide updates to the internal firmware if any such
updates are made available to users. Any attempt to access, retrieve,
copy, modify, distribute or otherwise use any of the Braava software is
strictly prohibited.
WARNING: Changes or modifications not expressly approved by
iRobot could void your warranty.
FCC Notice:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following conditions:
1. The device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
This device complies with RSS-210 of the Industry Canada Rules.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept interference
received, including interference that may cause undesired operation.