iRobot Braava 300 Series - Manual (Page 10)

10 Braava 300 Series Owner’s Manual
Charging
• Stand Braava on its end to access the charging port.
• Plug the adapter into a standard electrical outlet and into Braava’s
charging port.
• Charge Braava until a solid blue light appears on the power button*.
• It may take Braava a few charging cycles to reach its full capacity.
Charging Port
Battery and Charging
TIP: Braava 380t can also be charged with the Braava Turbo Charge Cradle.
See Cradle instructions for details (pg.11).
CAUTION: Do not charge Braava while the Pro-Clean reservoir pad
or any wet cloth is attached. Charge using a standard 120V outlet only.
Only use the included adapter to charge Braava. Always disconnect
Braava from the adapter before cleaning.
Charging Port
* The blue light indicates on average that the
battery has charged to 80% of its capacity.
Charging time and run time can be
affected by operating temperature,
floor type and other conditions.
Mode Braava 320 Braava 380t
Run Time Sweep up to 3 hrs up to 4 hrs
Mop 2 hrs 2.5 hrs
Charge Time N/A 10 hrs 2 hrs