EasyN F2 Series Central Management System User Manual
Page 33
32
MV-F2E-E-1.0.6.45
User the follow DNS Address Server： Set DNS server manually
Primary DNS server：
The ip address of primary DNS server
Secondary DNS server：
The ip address of secondary DNS server
HTTP Port： Visit the http port of IPCAM,the default
port is 80.
Notice:
If set the IP address of secondary DNS server,the IP address of primary DNS
server must be filled out.
After change the settings,wille restart the IPCAM automatically,and please
change the item of IPCAM Table at the same time,or obtained by IPSearch’s
search through pages.