EasyN F Series User manual - Manual (Page 9)

English EasyN IP Camera User Manual
www.easyn.com MFE-E-A3
8
3. IE Browse to IP Camera
After the IP camera is connected to the PC LAN through a router, you can
operate the IP camera via PC. To start, run the software that is in the CD given.
3.1. Use Finder
Run the CD, double click file, and double click . A
search bar icon will be found, double click search bar, and then the following interface
will appear:
If the internet is connected, it should show device styles, name, and IP address in
the device list, (if it does not show, please check your power & internet cable
connection).
The left side of the interface contains the current computer configuration
information; while the right side contains information on the selected device network
configuration. Default IP camera address will be set automatically according to the
LAN, manually setting is not needed (Note:
DHCP should be opened in the router), HTTP
port is 81.
Inner Access refers to the LAN access address; Outer Access refers the WAN access
address.